- BND自研
- 德國FEMTO放大器
- 德國GTE
- Pacific Lasertec...
- 數據采集AA LAB SYSTE...
- 流量測量AA LAB SYSTE...
- 光纖鏈路AA LAB SYSTE...
- AA Lab Systems放大...
- HGE
- 博納德試驗指針?shù)N
- 插頭插座類檢測設備
- 燈頭燈座類檢測設備
- 標準地板防滑系列
- 進口手持型測力計
- 意大利Gabbrielli
- 英國MUNRO風速風向表
- 美國DL放大器
- 陶瓷扭轉粘度計
- 高壓電源放大器
- DEI脈沖發生器
- 瑞士Zurich Instrum...
- 冷凍負載試驗包
- 博納德試驗機設備
- 體育檢測儀器
- 美國ED&D試驗指
- 德國PTL試驗機設備
- 德國PTL試驗指針?shù)N
- 光纖光譜儀
- 微型稱重傳感器
- 光學斬波器
- 高集數據采集卡
- 美國SRS放大器
- 德國WAZAU系列
- MONROE靜電測試儀
- 其他
- TTI 光學斬波器
Freezing Load Test Package
The freezing load test package is made according to ISO15002 /EB15002/ IEC62552, and we can also make the package in different standard according to different requirement.
Test package is placed in the frozen food storage compartment and ice greenhouse performance test, or in a freezer to test the freezing capability test, to simulate the load capacity of frozen food.
1. The freezing point of the test package is -1℃ (Its thermal performance is equivalent to lean beef)
2. Packaging material is a thin layer of plastic, or with appropriate materials which can do medium vapor exchange with the environment, immediately seal the packaging material after filling,
3. When measured in ice greenhouse, must use the -5℃ test package.
4. You cannot use in test of testing freezing capacity and load temperature rise time.
5. M package means the 500g test package, it equipped with a thermocouple in the geometric center to measure the temperature. The thermocouple contact the package directly.
size:
1、freezing load test package 0.125kg -1℃ size:25mm*50mm*100mm;
2、freezing load test package 0.25kg -1℃ size:250mm*50mm*100mm ;
3、freezing load test package 0.5kg -1℃ size:225mm*100mm*200mm;
4、freezing load test package 0.5kg -1℃ size:250mm*100mm*100mm;
5、freezing load test package 1kg -1℃ size:250mm*100mm*200mm;
6、freezing load test package 0.5kg -5℃ size:250mm*100mm*100mm;
7、freezing load test M package 0.5kg -1℃ size:250mm-100mm*100mm;
8、freezing load test M package 0.5kg -5℃ size:250mm-100mm*100mm;
1. International and euro standard test package (IEC62552 / ISO EN 15502/GB8059.1-4)
-1 ℃ and -5℃ two type,
Size (mm) |
Weight (g) |
Size Tolerance |
Weight Tolerance |
25 × 50 × 100 |
125 |
When the Side length size is 25mm to 50mm, tolerance is allowed to be ± 2mm. 100mm to 200mm, ± 3mm. |
±2% |
50 × 50 × 100 |
250 |
±2% |
|
25 × 100 × 100 |
250 |
±2% |
|
25 × 100 × 200 |
500 |
±2% |
|
50 × 100× 100 |
500 |
±2% |
|
50 × 100 × 200 |
1000 |
±2% |
M package with thermocouple wire or embedded copper pipe, -1℃ / -5℃
Size (mm) |
Weight (g) |
Size Tolerance |
Weight Tolerance |
50 × 100 × 100 |
500 |
±2mm |
±2% |
freezing load test package 0.5kg -1℃/ IEC62552
freezing load test package 0.5kg -1℃/ IEC62552
freezing load test package 0.5kg -1℃/ IEC62552
freezing load test package 0.5kg -1℃/ IEC62552
freezing load test package 0.5kg -1℃/ IEC62552